Help & Advice

How to clean a resin shower tray

Acrystone® resin shower trays stand out for their high resistance to stains and ease of cleaning. Here is how to clean and keep them looking like new.

Shower cleaning is one of the most common concerns and frequently asked questions. In addition to keeping materials looking as new as possible, we are also care about the hygiene of bathroom spaces, which are particularly sensitive to the proliferation of mould and microorganisms.

Acrystone® resin shower trays are designed to a high standard of durability, and are also antibacterial. The composition of the material makes routine cleaning and hygiene simple and virtually effortless.

How to remove cement glue or mortar residues after installation?

Once the product is installed, to remove any cement or mortar that may remain on the surface, use a joint descaler or a specific cement cleaner. Avoid rubbing the shower tray directly to avoid scratching it.

How to perform routine cleaning of an Acrystone® resin shower tray?

After using it, rinse with water and ensure good ventilation of the bathroom.

For the routine cleaning of the resin shower tray, use water, liquid cleaners and soft cloths or non-abrasive sponges. Never use scourers as they can damage the surface of the shower tray. Don´t mix different cleaning products.

Likewise, as part of the shower tray maintenance routine, you should clean the grille regularly to avoid soap and limescale residues. In order to do clean it, remove it and apply a stainless-steel cleaning product.

If you use hair dye, rinse the shower tray with soap and water after every shower.

How to remove limescale from the shower tray

You should regularly clean limescale residues from your shower tray. use an anti-scale product following these steps:

1. Remove the drainage grille and apply the antiscale product with the help of a damp cloth over the entire surface of the shower tray.

2. Leave the product to act for 15 minutes, then rinse thoroughly.

3. Place the grille back and rinse the shower tray again.

How to remove stubborn stains from a resin shower tray

Although the material has been developed to prevent the appearance of stains, you should sometimes carry out specific cleaning beyond the usual maintenance. If you need to remove stubborn stains, we have a stubborn stain removal kit for Acrystone® resin shower trays. The perfect ally to restore the material to its original state. 

The kit contains a brush, gloves and a step-by-step instruction manual:

Step 1

Remove the drainage grille and use soap and water with the supplied brush.

Step 2

Rinse with water.

Step 3

Clean the shower tray with a damp cloth and a cleaning product specific to the type of stain (lime, cement-glue for tiles, grease, soap residues, etc).

Step 4

Leave the above-mentioned cloth on the most affected area and leave the product to act for 15-20 minutes. After this, remove the cloth and rub with the sponge supplied.

Step 5

Rinse with water. If stains persist, go back to step 3

Step 6

Once the stain is removed, clean with soap and water with the supplied brush.

Step 7

Place the grille back and rinse again.

limpiar plato ducha resina

Zeus Shower Tray

  • Subscribe to our news.

  • Building #AnotherTomorrow.

  • Anticipate the future.